This post and the photos within it may contain affiliate links. As an Amazon Associate, I earn from qualifying purchases. If you make a purchase through one or more of the links, I may receive a small commission at no extra cost to you.
We all love vinyl crafts; they are beautiful, appealing, and easy to craft. but sometimes they can be annoying, especially when vinyl refuses to stick to transfer tape. Although vinyl is an excellent material for crafting, it has so many sticking issues. Sometimes it doesn’t want to be applied to surfaces like wood, and other times it doesn’t want to get along with transfer tape, which is something not to be ignored!
Therefore, if you are annoyed with your vinyl not sticking to the transfer, then you have landed on the right page. In this article, we are going to give you plenty of solutions to this problem.
If your transfer tape is not picking up the vinyl, then there could be a problem with the transfer tape itself. Maybe it’s too old or doesn’t have good quality; the same things apply to vinyl as well. That’s why you should make sure you read this article till the end and get your vinyl stick on the transfer tape again!
Related: How To Stick Vinyl To Glass (Fix Vinyl Not Sticking to Glass)
What is Vinyl?
Vinyl is a flexible, water- and heat-resistant material sheet that is often used to create crafts using Cricut machines.
It has an adhesive on its back side that helps it stick to materials like wood, metal, plastic, and many more. An amazing fact about this adhesive is that it can last up to 3 years and can withstand normal washing. You don’t have to worry about washing your cups and mugs after you have applied vinyl decals to them.
This versatility of vinyl makes it a really trustworthy option for many crafters and Cricut lovers, which is why they keep making some amazing crafts with it.
Fix Vinyl Won’t Stick To Transfer Tape
Your vinyl not sticking to the transfer tape is one of the most annoying problems that can happen while crafting. Many Cricut users face this problem, and when this happens, vinyl completely refuses to stick to transfer tape. But you don’t have to worry about this problem anymore since we have so many solutions to help you out.
Here are some of the best solutions that can help you deal with the vinyl not sticking to the transfer tape situation:
1. Scrape Both Sides Thoroughly
In many cases, transfer tape may have weak adhesiveness because it’s too old or has a bad quality, which prevents it from picking up the vinyl. Or it’s possible that your vinyl has too much stickiness and that’s the reason it’s not leaving the Cricut paper. In such a case, the best thing you can do is scrape the front and back sides of the design properly.
Take an old credit card or sticker-scrapping tool so that you can do this work more efficiently. This will help your vinyl stick to the tape really easily. Once you are done peeling off the decal, your vinyl will easily stick to the tape.
2. Replace Your Transfer Tape
A great thing about transfer tapes is that they can be reused again and again, but after you have used them multiple times in a row, they start losing their adhesiveness. Maybe you did this before the current project, and that’s why your transfer tape isn’t picking up the vinyl.
If that’s the case, then consider replacing it; once a tape has lost its adhesiveness, you can’t use it at all. Take a new sheet of tape and try sticking the vinyl to it; it will surely work!
3. Purchase a New Transfer Tape
Unfortunately, many people have found that Cricut transfer tape has a really bad quality. It’s not as sticky as it’s supposed to be, and it loses its adhesiveness after so few uses, which can also be the reason your vinyl is not sticking to the transfer tape.
If this is the situation, then the only available solution is to purchase a good-quality transfer tape. It’s true that finding a decent tape at the moment can be really hard, and that’s the reason why we’ve already listed the best transfer tapes available on the internet. Keep reading till the end to know more about them!
Also read: What Should I Use Instead of a Cricut Mat?
What Transfer Tape Works Best For Vinyl?
There are thousands of different transfer tapes available on the internet, but the one that works best for vinyl is YRYM HT Clear Vinyl Transfer Paper Tape Roll.
Why? It’s because this adhesive tape has more benefits than any other tape; some of them include
- The best option for adhesive vinyl is Oracal 651, which is also known as the best vinyl.
- The strong grip can easily pick up and release vinyl.
- Releases no sticky residue on the project.
- Tear resistant.
- One roll can last up to a year.
- The clear red grid helps you easily measure designs.
- From Cricut to Silhouette, works best for every cutting machine.
That’s not all; we have some more transfer tapes that can work well for vinyl; here’s a list of some of them:
- HTVRONT 6-Inch Transfer Tape for Vinyl
- VViViD Vinyl Transfer Tape
- HTVRONT 12-Inch by 120-Inch Transfer Tape for Vinyl
- Cricut Vinyl StrongGrip Transfer Tape
All these tapes have an amazing grip. It doesn’t matter whether you use Oracal 651 or not; you will never face the vinyl not sticking to transfer tape problem ever again if you use the above ones. Not to mention, they are specially made for vinyl, which makes them the most suitable option for your vinyl projects.
Lastly, unlike Cricut transfer rolls, they are quite large in size and cost much less, which saves money and provides you with an easy crafting experience. This is why trying out all these transfer tales is a must.
Conclusion
Your vinyl not sticking to the transfer tape is sure an annoying problem, but with the above solutions, like scrapping the design, replacing the tape, or purchasing a brand new tape, you can easily solve this problem.
